Bushi Forged Series

Mokkogata Katana

Forged 1095 Hcs clay temper Hamon – Maru Lamination

Forged 1095 Hcs clay temper Hamon – Maru Lamination

  The geometry of the sword is perfect with a real clay hamon . To create a sword worthy of being called a performance cutter.  The sword had to be able to take on multiple mats and still be able to perform complex trick cuts. A 1095 High carbon steel construction with an excellent heat treat was the most logical solution. The strength and resilience of 1095 High carbon steel has been proven to us time and again with our previous models.

 

Features:

  • Blade: The blade of the sword has been constructed from AISI 1095 High carbon steel  Steel in a Maru Lamination with real kisaki, The hamon has been authentically created and features  with a prominent Nioi line.
  • The blade comes full tang and Razor Sharp.
  • Saya: The Koi-guchi has been reinforced with Buffalo horn.
  • Tsuba: The Tsuba begins with a one piece brass construction Habaki. Two brass Seppas secure the blade of the sword. The Tsuba is  black iron design Mokkogata.
  • Tsuka: The Fuchi is blackened iron  with genuine Same (ray skin) and brown Silk Ito Tsukamaki use hishigami. Two Bamboo Mekugi secure the tang of the sword into the Tsuka, while bright brass Menuki decorate each side of the Tsuka.
  • Blade: Very Sharp
  • Nagasa Length: 72 Cm
  • Blade Material: AISI 1095 High Carbon Steel
  • Polish : Traditional polishing with wet stone.
  • Tsuka Length: 29 Cm
  • Blade Construction: Maru lamination
  • Tsuba Material: Handmade Iron
  • Hardness of Yakiba: 59 HRC
  • Hardness Shinogi Ji : 40 Hrc
  • Ito & Sageo Material: Silk
  • Sageo : Japanese Synthetic Silk Shigeuchi Sageo
  • Fuchi Kashira Material: Iron
  • Mekugi: Smoked Bamboo Double Mekugi
Price : Rp.4.000.000
Status: Out Of Stock

 

Semba Saburoe Katana

Forged Kobuse 1095-tsuba   This Katana hand-forged from 1095 high-carbon steel with Kobuse lamination, clay-tempered and hand-polished on wet stone. The blade is fitted in a Shi-shi theme throughout with lion dog Menuki. The Tsuka is wrapped in green silk Ito use hishigami and the Saya is finished in a black gloss lacquer with ray skin.The blade comes full tang and very sharp.

 

Features:

  • Blade: The blade of the sword has been constructed from AISI 1095 High carbon steel  Steel in a Kobuse Lamination, The hamon has been authentically created and features  with a prominent Nioi line.
  • The blade comes full tang and Razor Sharp.
  • Saya: The Koi-guchi has been reinforced with Buffalo horn.
  • Tsuba: The Tsuba begins with a one piece brass construction Habaki. Two brass Seppas secure the blade of the sword. The Tsuba is handmade copper .
  • Tsuka: The Fuchi is cooper  with genuine Same (ray skin) and green Silk Ito Tsukamaki use hishigami. Two Bamboo Mekugi secure the tang of the sword into the Tsuka, while bright copper Menuki decorate each side of the Tsuka.
  • Blade: Very Sharp
  • Nagasa Length: 72 Cm
  • Blade Material: AISI 1095 High Carbon Steel + 1045 Medium carbon steel
  • Polish :Hand polish use wet stone.
  • Tsuka Length: 29 Cm
  • Blade Construction: Kobuse lamination
  • Tsuba Material: Handmade copper
  • Hardness of Yakiba: 60 HRC
  • Hardness Shinogi Ji : 40 Hrc
  • Ito & Sageo Material: Silk
  • Sageo : Japanese Synthetic Silk Shigeuchi Sageo
  • Fuchi Kashira Material: handmade copper
  • Mekugi: Smoked Bamboo Double Mekugi

Status : Out Of Stock

Click Image For Enlarge

Hannya Katana

Hannya

  The geometry of the sword is perfect with a real clay hamon and all authentic Koshirae. To create a sword worthy of being called a performance cutter.  The sword had to be able to take on multiple mats and still be able to perform complex trick cuts. A 1095 High carbon steel construction with an excellent heat treat was the most logical solution. The strength and resilience of 1095 High carbon steel has been proven to us time and again with our previous models. The steel has an HRC of 60 degrees .


Features:

  • Blade: The blade of the sword has been constructed from AISI 1095 High carbon steel  Steel in a Maru Lamination with O-kisaki, The hamon has been authentically created and features  with a prominent Nioi line.
  • The blade comes full tang and Razor Sharp.
  • Saya: The Koi-guchi has been reinforced with Buffalo horn.
  • Tsuba: The Tsuba begins with a one piece brass construction Habaki. Two brass Seppas secure the blade of the sword. The Tsuba is  black iron design Mokko.
  • Tsuka: The Fuchi is blackened iron  with genuine Same (ray skin) and brown Silk Ito Tsukamaki use hishigami. Two Bamboo Mekugi secure the tang of the sword into the Tsuka, while bright brass Menuki decorate each side of the Tsuka.
  • Blade: Very Sharp
  • Nagasa Length: 72 Cm
  • Blade Material: AISI 1095 High Carbon Steel
  • Polish : 10 stage polishing with japanese finger stone.
  • Tsuka Length: 29 Cm
  • Blade Construction: Maru lamination
  • Tsuba Material: Handmade Iron
  • Hardness of Yakiba: 60 HRC
  • Hardness Shinogi Ji : 40 Hrc
  • Ito & Sageo Material: Silk
  • Sageo : Japanese Synthetic Silk Shigeuchi Sageo
  • Fuchi Kashira Material: Iron
  • Mekugi: Smoked Bamboo Double Mekugi
Price : Rp.4.500.000
Status: Out Of Stock
Click Image For Enlarge

“Video Test Hannya Katana  for slice paper”